个人首页  个人简介  学术兼职   研究方向  研究成果  荣誉称号  其它信息   Resume  东大主页  教师网页

著作

  1. 球墨铸铁的强度评价,东北大学出版社,2002.01,于春田,王磊,刘春明
  2. 球墨铸铁的强度评价,东北大学出版社,2002.01,于春田,王磊,刘春明

专利

  1. 田妮,赵刚,刘春明,左良,宋文举,刘宏. 改善6111铝合金汽车板成形性及烤漆硬化性预热处理工艺,2008,中国发明专利,ZL200610046027.X

  2. 王常珍,厉英,刘春明. 用固态质子导体对铝或铝合金熔体脱氢的方法及其装置,2007,中国发明专利,公开号:CN 101215644A

获奖

  1. 2000年“宽口径专业—材料科学与工程专业人才培养方案及教学内容体系的研究”获辽宁省教学成果二等奖

  2. 2001年“复合微合金化元素在高强汽车梁钢中的作用”获CITIC-CBMM铌应用技术优秀论文奖

  3. 2002年“高强高韧精轧螺纹钢筋新工艺开发”获鞍山市科技进步一等奖、辽宁省科技进步二等奖

  4. 2003高强高韧精轧螺纹钢筋新工艺开发获中国冶金科技奖三等奖

  5. 2008年“熔体直接发泡法制造闭孔型泡沫铝材料生产技术”获辽宁省技术发明一等奖

  6. 2009年“集装箱用SPA-H耐大气腐蚀钢”获辽宁省科技成果转化奖一等奖

论文

1983

  1. 刘春明,张钢华,徐家祯,梁志德: “考虑畸变影响的残留奥氏体的X射线测定的电算法,冶金分析与测试、冶金物理测试分册、第3(1983)pp.27

1988

  1. C.M.Liu, K.Abiko and H.Kimura: “ Effect of Silicon on the Grain Boundary Segregation of Phosphorus and the Phosphorus Induced Intergranular Fracture in High Purity Fe-Si-P Alloys”, Proceedings of the 8th International Conference on the Strength of Metals and Alloys, Tampere, Finland, 22-26 August 1988, Edited by P.O.Kettunen, T.K.Lepist, M.E.Lehtonen, Pergamon Press, Vol.2, pp.1101-1106.

1990

  1. Lin Zhaoqi, Liu Chunming, Zhao Gang, Ru Huongqiang: “A Study of the Nucleation of Precipitates in an Al-Zn-Mg Alloy”, Proceedings of the Second International Conference on Aluminum Alloys—Their Physical and Mechanical Properties, Beijing, China, 9-13 October 1990, Edited by C.Q. Chen, E.A.Starke, Jr., International Academic Publishers, pp.446-451.

1992

  1. C.M.Liu, T.Nagoya, K.Abiko and H.Kimura: “Effect of Boron on the Grain Boundary Segregation of Phosphorus and Intergranular Fracture in High Purity Fe-0.2%P-B Alloys”, Metall. Trans. A, Vol.23A(1992), pp.263-269.

  2. C.M.Liu, K.Abiko and H.Kimura: “Prevention of the Intergranular Fracture by Addition of Silicon and Aluminum in a High Purity Fe-0.2%P Alloy with Trace of Boron”, Metall. Trans. A, Vol.23A(1992), pp.1515-1519.

  3. K.Abiko and C.M.Liu: “Role of Solute Atoms on Intergranular Fracture in High Purity Iron Alloys”, Proceedings of the Robert I. Jaffee Memorial Symposium on Clean Materials Technology, ASM Materials Week, Chicago, Illinois, USA, pp.9-16 November 1992, pp.9-16.
  4. 周燕岛,刘春明,安彦兼次,木村宏: “高纯度Fe-0.15%C合金的高温延性及硫的影响,山东工业大学学报,Vol.22(1992), pp.1-9.

1993

  1. 诸桥智彦,星孝弘,大岩烈,刘春明,安彦兼次: “电界放射型オ-ジユ电子分光分析法いた高纯度Fe-S合金中粒界微小析出物分析”, 表面科学,Vol.14(1993), pp.436-439.
  2. M.Tanino, C.M.Liu, K.Akiyama, K. Abiko and S.Takaki: “Preparation of Ultra-High Purity Fe-Cr Alloys and Their Mechanical Properties”, Proceedings of International Conference on Innovation Stainless Steel, Florence, Italy 11-14 October 1993, Published by ASSOCIAZIONE ITALIANA DI METALLURGIA, I-20121 MILANO, Italy, Vol.2, pp.2.271-2.276.

1994

  1. C.M.Liu, K.Abiko and M.Tanino: “Role of Chromium in the Intergranular Fracture of High Purity Fe-P-Cr Alloys with Small Amounts of Carbon”, Mater. Sci. Eng., vol.A176(1994), pp.363-369.
  2. C.M.Liu, T.Iyama, H.Suenaga, K.Abiko and M.Tanino: “Effect of Sulfur Segregation at Grain Boundaries on Hot Ductility of High Purity Iron”, Proceedings of The First International Conference on Ultra High Purity Base Metals (UHPM-94), Kitakyushu-City, Japan, 24-27 May 1994, Edited by K.Abiko et al., (The Japan Institute of Metals), pp.500-506.

1995

  1. 安彦兼次,高木清一,刘春明,谷野满: “Fe-Cr合金の超高纯化と机械的性质”, 高纯度Fe-Cr合金の诸性质、日本铁钢协会、1995, pp.138-156.

  2. K.Abiko, C.M.Liu, Masateru Ichikawa, H.Suenaga and M.Tanino: “Effect of Phosphorus on Hot Ductility of High Purity Iron”, Journal de Physique IV, Vol.15(1995-C7), pp.335-340.

  3. M.Mitsuru and C.M.Liu: “Grain Boundary Embrittlement in Iron Alloys, an AES and AP-FIM study”, Annales de Physique, Colloque C3, vol.20(1995), pp.C3-93-C3-100.

  4. C.M.Liu, K.Abiko and M.Tanino: “Effects of Additional Elements on Deformation of High Purity Fe-14%Cr at Elevated Temperatures”, Proc. of Inter. Sym. on Advanced Materials and Technology for the 21st Century, Dec. 13-15, 1995, The Japan Inst. of Metals, pp.124.

1996

  1. 林肇琦,赵刚,李洪晓,刘春明:“氢对Al-Li合金8089-T6力学性能及应力腐蚀寿命的影响”,第三届全国铝锂合金研讨会论文集,铝加工杂志编辑部出版,(1996), pp.87-91.

1997

  1. 刘春明,石渡保生,安彦兼次,谷野满:“微量碳对高纯铁机械性能的晶粒尺寸依存性的影响”东北大学学报,vol.18S(1997), pp.164-168.

  2. M.Tanino, C.-M.Liu, A.Tsuchiya, and T.Matsuo: “Effect of C, N, Mn and Mo on the Ms and Md Temperatures in High-Purity Fe-18%Cr-10%Ni Stainless Steels”, Proc. of inter. conf. on thermomechanical processing of steels & other materials, THERMEC‘97, Edited by T.Chandra and T.Sakai, TMS, 1997, pp.195-201.

  3. 林肇琦,赵刚,李洪晓,茹红强,刘春明:“氢对AL-Li合金2091-T6组织性能的影响”,金属学报,vol.33(1997), pp.1047-1052.

1998

  1. C.M.Liu, K.Abiko and M.Tanino. Role of Phosphorus in Suppressing Intergranular Fracture at Elevated Temperatures in High Purity Fe-0.002%S-P Alloys, Proc. China-EU Workshop on New Mater. Res., Beijing, 19-21 Nov., 1998, 189-193.

1999

  1. 林肇琦,茹红强,赵刚,于大全,刘春明:“氢对AL-Li合金8091-T6疲劳寿命和断裂特点的影响”,金属学报,vol.35(1999), No.3, pp.257-260.

  2. 刘春明,周燕岛,安彦兼次,木村 宏:“微量硼对高纯铁中硫的沿晶偏析及其引起的沿晶断裂的影响”,东北大学学报,vol.20(1999), No.1, pp.57-60.

  3. 赵刚,刘春明,黄宏涛,林肇琦:“高纯硬铝2224-T3510挤压型材组织性能的研究”,有色矿冶,vol.15(1999), No.2, pp.33-37.

  4. 赵刚,黄宏涛,刘春明,林肇琦:“高纯硬铝2324-T39厚板组织性能的研究”,有色矿冶,vol.15(1999), pp.41-45.

  5. C.M.Liu, K.Abiko and M.Mitsuru: Relation between the Intergranular Segregation of S and the Hot Ductility in High Purity Fe-S Alloys, Acta Metall. Sin.(English Letters), Vol.12, No.4(1999), pp.637-644.

  6. C.M.Liu, K.Abiko and M.Mitsuru: Prevention of the Intergranular Fracture at Elevated Temperatures by Addition of Phosphorus to a High Purity Fe-0.002%S Alloy, Acta Metall. Sin.(English Letters), Vol.12, No.4(1999), pp.596-601.

  7. X.L.Yang, X.Sun, C.W.Wang, D.Q.Geng and C.M.Liu: A Valve for Temperature Control Dominated by Shape Memory Alloys, Acta Metall. Sin.(English Letters), Vol.12, No.4(1999), pp.492-494.

2000

  1. 任海鹏,张万显,林仁荣,刘春明:“模拟动态拉伸观察低碳钢变形与断裂”,东北大学学报,vol.21(2000), S2, pp.82-84.

  2. 白玉光,孙振岩,刘春明,王建军,李凯:“含Nb芯热回火高强度螺纹钢筋的组织与性能”,东北大学学报,vol.21(2000), S2, pp.102-106.

  3. Bai Y.G., Wang J.J., Wang T.L., Sun Z.Y., Liu C.M.: Role of Microalloying Elements in High Strength Steels for Automobile Girder, Proc. Of the fourth Inter. Conf. On HSLA Steels, Oct. 30-Nov.2, 2000, Xi‘an, China, eds: Liu Guoquan, Wang Fuming, Wang Zubin, Zhang Hongtao, Metall. Industry Press, pp.288-293.

  4. 郭军霞,刘春海,赵刚,刘春明:“铝及铝合金中氢含量的测定”,黄金学报,Vol.2, (2000), pp.163-166.

  5. 林仁荣、任海鹏、白玉光、刘春明:“10MnCuPTi耐大气腐蚀钢的韧性研究”,黄金学报,Vol.2(2000), pp.243-245.

  6. 王亚男,刘春明:“氮化气氛对40Cr钢离子氮化层的影响”,鞍山钢铁学院学报,Vol.23(2000), No4pp.257-259.

2001

  1. 王亚男,沈明钢,刘春明:“初期凝固坯壳的自由变形和凝固组织”,钢铁研究学报,Vol.13(2001), No.1pp.46-49.

  2. 刘春明,王建军,林仁荣,崔文芳,白玉光:“微量碳在钢铁材料细晶强化中的作用”,材料科学与工艺,Vol.9(2001), pp.301-304.

  3. 赵刚,李洪晓,刘春明,郭亚萍:“2014铝合金的变形时效处理”,东北大学学报,Vol.222001No.6pp.664-667.

2002

  1. 刘春明,崔文芳,王建军,林仁荣:“00Cr30Mo2铁素体不锈钢475℃脆性的研究”,钢铁,Vol.37(2002)No.1pp.47-51.

  2. 任海鹏,马洪悌,刘春明,崔润炯:“非调质油井管钢的开发应用”,钢铁,Vol.37 (2002)No.1pp.61-64.

  3. W.F.Cui, C.M.Liu, L.Lian and G.Z.Luo: “Characteristics of Microstructures And Second-Phase Particles in Y-Bearing Ti-1100 Alloy”, Mater. Sci. Eng. A, Vol.323A(2002), pp.192-197.

  4. 王春怀,王凯,崔文芳,刘春明:“热变形参数对X60管线钢高温变形行为和显微组织的影响”,材料与冶金学报,Vol.1(2002)No.1, pp.45-48.

  5. 赵刚,刘春明,崔文芳,李洪晓:“2014合金析出相尺寸多级化的组织控制”,中国有色学报,Vol.122002)铝合金专辑,pp.161-165.

  6. 任海鹏,王建军,王凯,刘春明:“35MnVN非调质钢高温变形再结晶行为”,材料与冶金学报,Vol.1(2002)No.2, pp.132-135.

  7. 王凯,王建军,白玉光,崔文芳,任海鹏,刘春明:“X60管线钢高温变形行为和组织性能的研究”,铌在钢中的应用——微合金化技术国际研讨会论文集,2002489日,CITIC-CBMM微合金化技术中心,92-101.

  8. 王春怀,崔文芳,王凯,刘春明:“控轧轧制工艺对X60管线钢组织和性能的影响”,2002年全国低合金钢非调质钢学术年会论文集,2002824-27日,包头,中国金属学会低合金钢学术委员会、中国金属学会非调质钢学术委员会、全国钒钛钢协调组、中信铌钢发展奖励基金会,131-136.

2003

  1. Y.N.Wang and C.M.Liu: “Effect of Carbon on Grain Boundary Segregation of Phosphorus and Phosphorus-Induced Intergranular Fracture in High Purity Iron with Phosphorus”, J. Iron Steel Res., Vol.10(2003), No.1, pp.28-32.

  2. 白玉光,刘春明,任海鹏,张晓刚:“高强度精轧螺纹钢筋的组织与性能”,东北大学学报,Vol.242003No.3pp.268-271.

  3. 白玉光,田妮,刘春明,翁宇,周宏伟:“09CuPTiRE钢耐候性能及腐蚀过程研究”,材料与冶金学报,Vol.22003No.1, pp.63-67.

  4. 白玉光,刘春明:“高纯Fe-0.2%P-2%Cr-C合金晶界的高分辨俄歇能谱分析”,东北大学学报,Vol.242003No.4pp.373-376.

  5. 崔文芳,洪权,刘春明,周廉:“Ti-1100/0.1Y高温钛合金等温热压缩变形行为”,东北大学学报,Vol.242003No.6pp.572-575.

  6. 王春怀,虞海燕,王作奇,魏军,左良,刘春明,戴云阁:“酒钢L290管线钢非金属夹杂物存在状况的调查研究”,材料与冶金学报,Vol.22003No.2, pp.88-94.

  7. 王春怀,左良,刘春明:“酒钢X60管线钢的研制”,材料与冶金学报,Vol.22003No.2, pp.95-98.

  8. 孙荣耀,茹红强,赵媛,刘春明:“回火温度对新型冷作模具钢显微组织和性能的影响”,东北大学学报,Vol.242003No.10pp.817-817.

2004

  1. 刘宏,刘艳华,赵刚,刘春明,左良:“6xxx系汽车车身板铝合金的合金化及组织性能的研究”,轻合金加工技术,Vol.322004No.1, pp.44-47.

  2. 迟秀斌,刘春明,李吉和:“本钢铁道车辆用LZ50钢车轴坯的研制”,特殊钢,Vol.25(2004)No.2, pp.56-57.

  3. Lei Wang, T.Kobayashi and C.M.Liu: “Tensile properties and fracture behavior of SiCp/AC4CH composite at loading velocities of up to 10 m/s”, Mater Sci Forum, Vols 449-452(2004), pp.305-308.

  4. WANG Kai, WANG Li-jun, ZUO Liang, LIU Chun-ming: “Grain Refinement in V and V-N Microalloyed Low Carbon Steels”, Proceedings of Second International Conference on Advanced Structural Steels (ICASS 2004), April 14-16, 2004, Shanghai, China pp.232-235.

  5. 迟秀斌,李吉和,刘春明:“航空发动机用25Cr3MoA合金棒材的研制”,兵器材料科学与工程,Vol.272004No.239-42.

  6. 迟秀斌,邹天来,陈思联,刘春明:“25Cr3MoA合金棒材组织和性能的研究”,航空材料学报,Vol.242004No.5pp.11-14.

  7. 王亚男,王春怀,唐继权,刘春明:“X65管线钢抗H2S腐蚀的试验研究”,东北大学学报(自然科学版),Vol.252004No.5pp.420-4423.

  8. Wang Lei, Kobayashi Toshiro, Liu Chunming, Masuda Tomokazu: “High-loading velocity tensile properties and fracture behavior of SiCp/AC4CH composite”, Materials Transactions, Vol.45(2004), No.5, pp. 1738-1742.

  9. 吕爱强,张洋,刘春明,刘刚:“表面纳米化316L不锈钢在酸性介质中腐蚀性能的研究”,材料与冶金学报,Vol.32004No.2pp.129-132.

  10. 刘宏,赵刚,刘春明,刘沿东,左良:“6000系铝合金组织性能的研究进展”,机械工程材料,Vol.282004No.6pp.1-4.

  11. 吕爱强,刘春明,刘刚:“表面机械研磨316L不锈钢诱导表层纳米化”,东北大学学报(自然科学版),Vol.252004No.9pp.848-850.

  12. 郭俊峰,李平,赵刚,刘春明:“7055合金挤压带板纵横向的组织与性能”,材料与冶金学报,Vol.32004No.3pp.219-223.

  13. 吕爱强,刘刚,刘春明:“机械研磨诱导316L不锈钢表层组织的演变”,金属学报,Vol.402004No.9pp.943-947.

  14. 刘宏,刘艳华,赵刚,刘春明,左良:“MnAl-Mg-Si-Cu铝合金结晶相的影响”,中国有色金属学报,Vol.142004No.11pp.1906-1911.

2005

  1. 张国英,刘春明张辉:“钢铁材料组织超细化机理的电子理论研究”,物理学报,Vol.54(2005), No.2, 875-879.

  2. 任海鹏,王立军,刘春明:“亚温正火对铁素体珠光体型非调质钢韧性的影响”,材料与冶金学报,Vol.4(2005), No.1, 44-46.

  3. 王凯,王立军,任海鹏,白玉光,刘春明:“钒微合金化低碳钢高温变形动态再结晶”,材料与冶金学报,Vol.4(2005), No.1, 51-54.

  4. 李平,李艳霞,郭俊峰,赵刚,刘春明:“高强Al-Zn-Mg-Cu合金的固溶处理制度”,材料与冶金学报,Vol.4(2005), No.1, 60-64.

  5. 刘宏,宋文举,赵刚,刘春明,左良:“6000系铝合金汽车板预时效及组织性能”,中国有色金属学报,Vol.15(2005), No.2, 270-276.

  6. 吕爱强,张洋,李瑛,刘刚,刘春明:“异步轧制对表面纳米化316L不锈钢组织和性能的影响”,金属学报,Vol.41(2005), No.3, 271-276.

  7. LIU Hong, SONG Wen-ju, ZHAO Gang, LIU Chun-ming, ZUO Liang: “Effect of Mg on microstructures and properties of AL-Mg-Si-Cu aluminium alloys for automotive body sheets”, Trans. Nonferrous Met. Soc. China, Vol.15(2005), No.1, 30-34.

  8. 刘宏,赵刚,刘春明,左良:“MnAl-Mg-Si-Cu铝合金车身板组织和性能的影响”,东北大学学报(自然科学版)Vol.26(2005), No.4, 347-350.

  9. 张国英,张辉,刘春明,周永军:“钢铁材料中形变诱导相变超细化机理研究”,物理学报,2005, Vol.54, No.4, 1771-1776. (SCI, EI)

  10. 吕爱强,李瑛,刘刚,刘春明:“表面纳米化对316L不锈钢性能的影响”,材料研究学报,2005, Vol.19, No.2, 118-204. (EI)

  11. 王凯,王立军,任海鹏,刘春明:“低碳钢形变诱导相变组织在冷却过程中的晶粒长大”,东北大学学报(自然科学版)2005, Vol.26, No.7, 640-643. (EI)

  12. 吕爱强,贾庆贤,顾兆祖,刘春明:“酒钢连铸板坯表面纵裂的成因分析及改进措施”,材料与冶金学报,2005, Vol.4, No.3, 186-188.

  13. 齐国超,于晓中,安成强,孙杰,贡雪南,刘春明:“感应软熔工艺对镀锡板耐蚀性的影响”,材料与冶金学报,2005, Vol.4, No.3, 233-236.

  14. 刘宏,刘春明,左良:“几种6000系汽车板铝合金时效行为及性能的研究”,机械工程材料,2005, Vol.29, No.6, 10-13.

  15. 张国英,刘春明,张辉,赵子夫:“钢铁材料中刃位错与溶质原子的交互作用”,东北大学学报(自然科学版),2005, Vol.26, No.10, 972-974. (EI)

  16. Wang Kai, Wang Li-jun, Cui Wen-fang, Ren Hai-peng, Liu Chun-ming: “Effect of microalloying on phase transformation in low carbon steels during continuous process”, Iron and Steel, 2005, Vol.40, Supplement, 147-150. (EI)

  17. 刘宏,赵刚,刘春明,左良:“几种6000系汽车板铝合金的结晶相”,东北大学学报(自然科学版),2005, Vol.26, No.11, 1070-1073. (EI)

  18. 王立军,吴彤,张红生,王凯,任海鹏,刘春明:“钒微合金化低碳钢多道次变形过程中的组织演变”,材料与冶金学报,2005, Vol.4, No.4, 291-294.

2006

  1. 陈扬,赵刚,刘春明,左良:“6111铝合金在冷轧过程中织构的变化”,东北大学学报(自然科学版),2006, Vol.27, No.1, 41-44. (EI)

  2. 王立军,王凯,任海鹏,刘春明:“VV-N微合金化低碳钢碳氮化物的形变析出”,东北大学学报(自然科学版)2006, Vol.27, No.2, 181-184. (EI)

  3. 陈扬,赵刚,刘春明,左良:“冷轧6111铝合金板材固溶处理后的再结晶织构”,中国有色金属学报,2006, Vol.16, No.2, 333-338. (EI)

  4. 张国英,张辉,刘春明,周永军:“微合金化元素晶界偏聚与钢的超细化理论研究”,物理学报,2006, Vol.55, No.3, 1369-1373. (SCI, EI)

  5. Kai Wang, Lijun Wang, Wenfang Cui, Chunming Liu: “Effect of V and V-N Microalloying on Deformation-Induced Ferrite Transformation in low carbon steels”, Journal of Materials Science and Technology, 2006, Vol.22, No.2, 159-163. (SCI, EI)

  6. LIU Hong, ZHAO Gang, LIU Chun-ming, ZUO Liang: “Effects of magnesium content on phase constituents of Al-Mg-Si-Cu alloys”, Transactions of Nonferrous Metals of Society of China, 2006, Vol.16, No.2, 376-381. (SCI, EI)

  7. 陈扬,田妮,赵刚,刘春明,左良:“形变量对6111铝合金再结晶织构的影响”,轻合金加工技术,2006, Vol.34, No.5, 23-27.

  8. 宋文举,田妮,权力伟,赵刚,刘春明,左良:“Al-1.3Si-1.2Mg-0.7Mn-0.6Cu铝合金的回归处理”,轻合金加工技术,2006, Vol.34, No.5, 44-47.

  9. A.Q. Lu, Y. Zhang, Y. Li, G. Liu, Q.H. Zang, C.M. Liu: “Effect of nanocrystalline and twin boundaries on corrosion behavior of 316L stainless steel using SMAT”, Acta Metallurgica Sinica (English Letters), 2006, Vol.19, No.3, 183-189. (EI)

  10. 崔文芳,刘春明,吴江华:“低碳钢超细晶铁素体的形成”,材料研究学报,2006, Vol.20, No.3, 240-244. (EI)

  11. 田妮,权力伟,宋文举,赵刚,刘春明,左良:“Si6000系铝合金车身板组织及性能的影响”,中国材料科技与设备,2006, Vol.3, No.3, 83-85.

  12. 张国英,刘春明,魏丹,王丹:“稀土在铸造锌铝合金ZA27变质中的作用机理研究”,沈阳师范大学学报(自然科学版),2006, Vol.24, No.3, 283-285.

  13. 齐国超,贡雪南,孙德恩,刘春明:“镀锡钢板铬酸盐钝化膜的X射线光电子谱分析”,东北大学学报(自然科学版),2006, Vol.27, No.8, 875-878. (EI)

  14. 陈扬,田妮,赵刚,刘春明,左良:“预先热处理对6111铝合金冷轧及再结晶织构的影响”,中国有色金属学报,2006, Vol.16, No.8, 1411-1416. (EI)

  15. 王立军,杜会娟,任海鹏,崔文芳,刘春明:“微量元素和变形条件对超细晶中厚板显微组织的影响”,材料与冶金学报,2006, Vol.5, No.3, 212-216.

  16. 吕爱强,顾兆祖,贾庆贤,刘安民,刘春明:“50#钢板坯连铸机粘结漏钢原因探讨及解决措施”,甘肃冶金,2006, Vol.28, No.3, 29-31.

  17. 石锋,崔文芳,王立军,姜周华,刘春明:“高氮奥氏体不锈钢研究进展”,上海金属,2006, Vol.28, No.5, 45-50.

  18. 吕爱强, 顾兆祖, 贾庆贤, 臧秋华, 刘春明:“酒钢板坯连铸漏钢成因分析及预防措施”,钢铁研究,2006, Vol.34, No.5, 48-51.

  19. LIU Hong, CHEN Yang, ZHAO Gang, LIU Chun-ming, ZUO Liang: “Effect of pre-aging on precipitation behavior of Al-1.29Mg-1.22Si-0.68Cu-0.69Mn-0.3Fe-0.2Zn-0.1Ti alloy”, Transactions of Nonferrous Metals of Society of China, 2006, Vol.16, No.4, 917-921. (SCI, EI)

  20. 吕爱强,刘春明:“SS400连铸板坯产生气泡的原因及解决措施”,鞍钢技术,2006, No.5, 33-35.

  21. 崔文芳,宋丹,刘春明:“Ti-47Al-5Nb 合金高温循环变形后的组织和断裂特征”,稀有金属材料与工程,2006, Vol.35, No.9, 1359-1362. (SCI, EI)

  22. 王立军,王凯,任海鹏,刘春明:“微量元素对304L不锈钢Hall-Petch关系式的影响”,东北大学学报(自然科学版), 2006, Vol.27, No.11, 1236-1239. (EI)

  23. 董杰,董俊华,韩恩厚,刘春明,柯伟:“低碳钢带锈电极的腐蚀行为”,腐蚀科学与防护技术,2006, Vol.18, No.6, 414-417.

  24. 马晓平,惠卫军,刘春明,于同仁,孙维:“碳含量对冷作强化非调质钢力学性能的影响”,金属热处理,2006, Vol.31, No.12, 29-32. (EI)

  25. 田妮,赵鑫,刘春明:“微量元素对Al-1.2Mg-1.3Si-0.6Cu-0.3Mn合金组织性能的影响”,材料与冶金学报,2006, Vol.5, No.4, 283-287.

  26. Li H.X., Wang L.J., Ren Y.P., Liu C.M., Hao S.M.: “Thermodynamic Calculation of the Equilibrium Phase-regions in the Nickel-free 18Cr Austenitic Stainless Steels With Nitrogen”, Proceedings of International Conference on High Nitrogen Steels, August 29-31, 2006, Jiuzhaigou Sichuan, China, Ed. By Han Dong, Jie Su, Markus O.Speidel, Published by Metallurgical Industry Press, 241-245.

  27. Shi Feng, Wang Lijun, Li Huabing, Jiang Zhouhua, Li Zhenbo, Wang Feng, Liu Chunming: “Precipitation behavior in Fe-18Cr-18Mn-0.43N high-nitrogen austenitic stainless steel”, Proceedings of International Conference on High Nitrogen Steels, August 29-31, 2006, Jiuzhaigou Sichuan, China, Ed. By Han Dong, Jie Su, Markus O.Speidel, Published by Metallurgical Industry Press, 92-97.

2007

  1. 孙霞,刘春明铸造低碳马氏体不锈钢的现状与发展趋势,铸造, 2007, Vol.56, No.1, 1-5. (EI)

  2. W.F. Cui, C.M. Liu, V. Bauer and H.-J. Christ: “Deformation and fracture analysis of a duplex g-TiAl alloy during low cycle fatigue”, Proceedings of 5th International Conference on Processing & Manufacturing of Advanced Materials (THERMEC 2006), July 4-8, 2006, Vancouver, Canada. Materials Science Forum, 2007, Vols.539-543, 1571-1576. (ISTP, EI, SCI)

  3. Ni Tian, Gang Zhao, Chun Ming Liu, Liang Zuo: “Microstructural Evolvement of Al-1.5Si-1.1Mg- 0.5Cu Alloy Ingot during Homogenization Treatment”, Proceedings: 2006 Beijing International Materials Week, June 25-30, 2006, Beijing, China. Materials Science Forum, 2007, Vols.546-549, 1037-1042.(ISTP, EI, SCI)

  4. 马晓平,惠卫军,刘春明,于同仁,孙维:“冷作硬化非调质钢冷变形过程中的鲍辛格效应”,钢铁研究学报, 2007, Vol.19, No.1, 39-43, 52.

  5. 张国英,刘春明,魏丹,王丹:“锌铝合金中稀土及杂质的晶界行为”,东北大学学报(自然科学版),2007, Vol.28, No.2, 209-212. (EI)

  6. 张国英, 刘春明, 张辉:“无钴高强韧钢力学性能研究”,材料科学与工艺, 2007, Vol.15, No.1, 124-127. (EI)

  7. LIU Hong, ZHAO Gang, LIU Chun-ming, ZUO Liang: “Effects of different tempers on precipitation hardening of 6000 series aluminum alloys”, Transactions of Nonferrous Metals Society of China, 2007, Vol.17, 122-127.(EI, SCI)

  8. 王立军,姚连登,任海鹏,刘春明:“微合金化对超细晶中厚板显微组织的影响”,东北大学学报(自然科学版),2007, Vol.28, No.4, 510-513, 521.(EI)

  9. F. Shi, L. J. Wang, W. F. Cui, C. M. Liu: “Precipitation Behavior of M2N in a High-Nitrogen Austenitic Stainless Steel during Isothermal Aging”, Acta Metallurgica Sinica (English Letters), 2007, Vol.20, No.2, 95-101.(EI)

  10. 李斌,李宏晓,刘春明Fe-18Cr-18Mn-C-Mo(Si)-N系相图垂直截面的热力学计算,材料与冶金学报,2007, Vol.6, No.1, 45-49.

  11. 田妮,赵刚,刘春明,左良:“固溶处理对Al-1.5Si-1.2Mg-0.6Cu-0.3Mn铝合金组织性能的影响”,材料与冶金学报,2007, Vol.6, No.1, 50-54, 76.

  12. W.F. Cui, C.M. Liu, V. Bauer, H.-J. Christ. “Thermomechanical fatigue behaviours of a third generation g-TiAl based alloy”, Intermetallics, 2007, Vol.15, No.5-6, 675-678.(EI, SCI)

  13. 迟秀斌,黄涛,刘春明:“炮弹系列用钢的转炉工艺研究”,兵工学报,2007, Vol.28, No.4, 458-562. (EI)

  14. 刘宏,陈扬,赵刚,刘春明,左良:“Mg含量对不同热处理的6000系合金成形性及烤漆硬化性的影响”,材料热处理学报,2007, Vol.28, No.3, 67-71.

  15. CHEN Yang, TIAN Ni, ZHAO Gang, LIU Chun-ming, ZUO Liang: “Evolution of {001}<110> orientation and related rotation of Al alloy 6111 during rolling”, Transactions of Nonferrous Metals Society of China, 2007, Vol.17, No.3, 523-530. (SCI, EI)

  16. 耿冰,王纯武,林仁荣,刘春明Cu-26.4Zn-4Al(RE)记忆合金工程元件热稳定性及应用,稀有金属,2007, Vol.31(专辑), 17-20.

  17. 董杰,崔文芳,张思勋,刘春明. CuPCr钢显微组织对全浸海水腐蚀行为的影响,东北大学学报(自然科学版),2007, Vol.28, No.9, 1293-1296. (EI)

  18. SHI Feng, WANG Lijun, CUI Wenfang, REN Yuping, LIU Chunming: Precipitates in an Isothermally Aged Fe-18Cr-12Mn-0.04C-0.48N High-Nitrogen Austenitic Stainless Steel, Rare Metals, 2007, Vol.26, Spec. Issue, 185-190. (SCI, ISTP)

  19. 董杰,王华川,张婕,霍喜伟,袁鹏举,董俊华,刘春明. 经济耐候钢的研究,莱钢科技,2007, No.5, 117-121.

  20. 董杰, 董俊华, 韩恩厚, 刘春明, 王华川. 低碳钢在工业大气环境中的锈蚀演化, 莱钢科技, 2007, No.6, 30-33.

  21. 王东,范建华,王常珍,刘春明. BaCe1-xYxO3-αBaCe0.9Sm0.1O3-α质子导体的表征及组成氢泵对铝熔体的脱氢,金属学报,2007, Vol.43, No.11, 1228-1232. (SCI, EI)

2008

  1. 田妮,赵刚,刘春明,左良:Al-1.3Si-0.7Mg-0.7Cu-0.3Mn铝合金薄板在固溶处理过程中的组织转变,东北大学学报(自然科学版),2008, Vol.29, No.1, 73-76. (EI)

  2. 王东,史苍际,刘春明,王常珍. CaZr0.9In0.1O3-α高温质子导体管的制备和性质表征. 金属学报,2008, Vol.44, No.2, 177-182. (SCI, EI)

  3. Kai Wang, Qiang Wang, Chunjiang Wang, Engang Wang, Chunming Liu, Jicheng He: Formation of aligned two-phase microstructure in Fe-0.25mass%C alloy under gradient high magnetic field, Materials Letters, 2008, Vol.62, 1466-1468. (EI)

  4. L.J. Wang, L.D. Yao, H.P. Ren, C.M. Liu: Study on Deformation Induced Ferrite Transformation in Mild Steels with or without Niobium, Materials Science Forum, 2008, Vols.575-578, 898-903.

  5. F. SHI, L.J. WANG, W.F. CUI , Z.B. LI, M.Z. XU and C.M. LIU: Hot Ductility of Fe-18Cr-12Mn-0.55N High Nitrogen Austenitic Stainless Steel, Materials Science Forum, 2008, Vols.575-578, 1056-1061.

  6. 董杰, 王华川, 张婕, 沈俊昶, 杨才福, 刘春明. 钢结构建筑用耐火钢的研究, 莱钢科技, 2008, No.1, 34-39.

  7. 齐国超, 钟健廉, 刘春明. 含氟镁生物陶瓷材料涂层的X射线光电子能谱分析, 材料与冶金学报, 2008, Vol.7, No.2, 130-134.

  8. Guochao Qi, Sam Zhang, K.A. Khor, Wenjian Weng, Xianting Zeng, Chunming Liu. An interfacial study of sol-gel-derived magnesium apatite coatings on Ti6Al4V substrates, Thin Solid Films, 2008, Vol.516, No.16, 5172-5175.

  9. Guochao Qi, Sam Zhang, K.A. Khor, Chunming Liu, Xianting Zeng, Wenjian Weng, Min Qian. In vitro effect of magnesium inclusion in sol-gel derived apatite, Thin Solid Films, 2008, Vol.516, No.16, 5176-5180.

  10. 董杰吉, 张思勋, 王慧玉, 韩文习, 刘春明. 超低碳贝氏体高强度钢的腐蚀性能研究. 武汉科技大学学报(自然科学版), 2008, Vol.31, No.2, 127-131.

  11. 董杰, 崔文芳, 张思勋, 刘春明. 海洋工程用超低碳贝氏体钢力学性能和海水腐蚀行为, 材料热处理学报, 2008, Vol.29, No.3, 99-103.

  12. 董杰, 任海鹏, 王立军, 刘春明. 耐候H型钢的耐腐蚀性, 机械工程材料, 2008, Vol.32, 增刊2, 96-99.

  13. 刘宏, 赵刚, 刘春明, 左良. 自然时效及预时效6000系合金人工时效析出行为, 材料热处理学报, 2008, Vol.29, No.4, 74-78.

  14. K. Wang, Q. Wang, J. He, C. Liu. Influence of vanadium on grain growth of deformation induced ferrite in low carbon steel during continuous cooling process, Steel Research International, 2008, Vol.79, No.9, 712-716.

  15. Guochao Qi, Sam Zhang, Khiam Aik Khor, Sun Woh Lye, Xianting Zeng, Wenjian Weng, Chunming Liu, Subbu S. Venkatraman, Lwin Lwin Ma. Osteoblastic cell response on magnesium-incorporated apatite coatings, Applied Surface Science, 2008, Vol.255, 304-307.

  16. 王中学,王慧玉,张思勋,韩文习,刘春明. 热变形参数对低碳贝氏体钢显微组织的影响,山东冶金,2008, Vol.30, No.5, 46-48, 53.

  17. 王东, 刘春明, 王常珍. 高温质子导体BaCe0.90Y0.10O3-α的制备与性质表征, 材料与冶金学报, 2008, Vol.7, No.4, 273-279.

  18. 陈昕,金纪勇,刘春明,杨玉,赵素华. 抗拉强度1200MPa贝氏体钢轨的开发及其在铁路上的应用,钢铁,2008, Vol.43, No.11, 108-112.

  19. SHI Feng, WANG Li-jun, CUI Wen-fang, LIU Chun-ming. Precipitation kinetics of Cr2N in high nitrogen austenitic stainless steel, Journal of Iron and Steel Research, International, 2008, Vol.15, No.6, 72-77.

  20. 周春林,刘春明,董亚锋,沙永志. 国外炼铁状况及中国炼铁发展方向,钢铁,2008, Vol.43, No.12, 1-6.

2009

  1. 董杰,董俊华,韩恩厚,刘春明,柯伟. 低碳钢在模拟酸雨大气条件下的锈蚀演化,腐蚀科学与防护技术,2009, Vol.21, No.1, 1-4.

  2. 齐国超, 刘春明. 含镁羟基磷灰石、磷酸三钙复合生物涂层的研究, 材料与冶金学报, 2009, Vol.8, No.1, 47-50.

  3. 虞海燕, 张洋, 吕爱强, 刘春明. 异步轧制对316L不锈钢组织与性能的影响, 材料与冶金学报, 2009, Vol.8, No.1, 69-72, 80.

  4. 齐国超, 许妮君, 刘春明. 溶胶凝胶法合成含镁磷酸三钙生物陶瓷涂层, 东北大学学报(自然科学版), 2009, Vol.30, No.4, 559-562.

  5. 王东, 刘春明, 王常珍. 高温质子导体Ba3Ca1.18Nb1.82O9-d的制备及表征, 金属学报, 2009, Vol.45, No.3, 345-350.

  6. 耿冰,刘春明. 应用微型计算机提高摆的振幅衰减测量精度,辽宁大学学报(自然科学版),2009, Vol.36, No.2, 143-145(英文)

  7. 安成强,郝建军,刘春明. 环保型镀锡液性能研究,表面技术,2009, Vol.38, No.3, 18-19, 36.

  8. 虞海燕,刘春明. 不锈钢生产技术发展状况概述,甘肃冶金,2009, Vol.31, No.3, 72-76.

  9. 周春林,刘春明,沙永志,曹军. 高炉喷煤工艺优化及系统改进. 钢铁, 2009, Vol.44, No.7, 20-23.

  10. 马小平,王立军,刘春明. 真空感应炉近常压气氛保护熔炼高氮马氏体不锈钢,材料与冶金学报,2009, Vol.8, No.3, 168-171.

  11. Cui W.F, Liu C.M. Fracture characteristics of γ-TiAl alloy with high Nb content under cyclic loading, Journal of Alloys and Compounds, 2009, Vol.477, No.1-2, 596-601.

  12. Kai Wang, Qiang Wang, Chunjiang Wang, Yi Yuan, Chunming. Liu, Jicheng He. Mechanism of formation of aligned two-phase microstructure in high magnetic field gradients, Philosophical Magazine Letters, 2009, Vol.89, No.11, 695-670.

  13. Ni Tian, Gang Zhao, Liang Zuo, Chunming Liu. Formability and correlation between formability indices of Al-0.9Mg-1.0Si-0.7Cu-0.6Mn alloy for automotive body sheets, THERMEC 2009, Materials Science Forum, 2010, Vols. 638-642, 356-361.

  14. 虞海燕,王凯,刘春明. 形变参数对低碳钢形变诱导相变的影响,钢铁研究,2009, Vol.37, No.5, 5-7.

  15. 王道远,刘春明,黄贞益,吴胜,陈大宏. 炉卷轧机辊系弹性变形与应用研究,冶金设备,2009, 总第177期,第5期,1-5.

  16. 王凯,虞海燕,赫冀成,刘春明. 冷速对钒微合金化钢形变诱导相变组织的影响,东北大学学报(自然科学版),2009, Vol.30, No.12, 1739-1742.