东北大学
NEU Site
Hongwei Zhang's Resume
 
 

Dr Hongwei ZHANG,  Professor

 

Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University

P. O. Box 314, No.3-11, Wenhua Road, Heping District, Shenyang, 110819, P. R. China

Tel:  86-24-83683985

Fax: 86-24-83681758

Email: hongweizhang@epm.neu.edu.cn

Website: http: //faculty.neu.edu.cn/epm/hongweizhang/

 

 

Education and Employments

1988.09-1992.07:Department of Thermal Engineering, Northeastern University, P.R. China, B.Sc. Degree in Thermal Engineering

1992.09-1995.03:Department of Thermal Engineering, Northeastern University, P.R. China, M.Sc. Degree in Thermal Engineering

1995.03-2001.03:Department of Thermal Engineering, Northeastern University, P.R. China, Ph. D. Degree in Thermal Engineering

2001.03-2004.12:Key Laboratory of EPM, Northeastern University, P.R. China, Lecturer

2005.01-2014.12: Key Laboratory of EPM, Northeastern University, P.R. China, Associate Professor

2015.01- present: Key Laboratory of EPM, Northeastern University, P.R. China, Professor

2002.04-2004.07:Department of Metallurgical Engineering, Northeastern University, P.R. China, Postdoctoral researcher

2009.01-2009.12:Centre for Material Forming (ARMINES-CEMEF),Ecole des MINES ParisTech, France, Visiting scholar

 

Research Interests

·  Coupled model of flow, heat and mass transfer in casting /continuous casting process.

·  Prediction of the micro/macro-segregation in alloys.

·  Thermodynamic calculation of solidification path in multicomponent alloys.

·  Cellular automaton prediction of alloy solidification microstructures.

Peer-Reviewed Publications:

-Journal papers

n         Hongwei Zhang, Qiang Liu, Hiroyuki Shibata, Qiang Wang, Pär Jönsson, Jicheng He, Keiji NakajimaPartial Equilibrium Prediction of Solidification and Carbide Precipitation in Ti-added High Cr Cast IronsISIJ International, 2014, 54(2), 374-383. SCI 000332682800019 & EI 20141417542731

n         Hongwei Zhang, Keiji Nakajima, Charles‑André Gandin and Jicheng He: Prediction of carbide precipitation using Partial equilibrium approximation in Fe-C-V-W-Cr-Mo high speed steels, ISIJ International, 2013, 53 (3), 493-501.  SCI 000316776500015 & EI 20131716232886

n         Qiang Liu, Hongwei Zhang, Qiang WANG, Xiangkui ZHOU, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Cooling Rate and Ti Addition on the Microstructure and Mechanical Properties in As-cast Condition of Hypereutectic High Chromium Cast IronsISIJ International, 2012, 52 (12), 2210–2219.  SCI 000312968000014 & EI 20130215872034

n         Qiang Liu, Peter HEDSTRÖM, Hongwei Zhang, Qiang WANG, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti-alloyed Hypereutectic High Chromium Cast Iron, ISIJ International, 2012, 52 (12), 2288–2294. SCI 000312968000025 & EI 20130215872046

n         Tie LiuQiang WangHong-Wei ZhangChang-Sheng LouKeiji NakajimaJi-Cheng HeEffects of high magnetic fields on solidification microstructure of Al–Si alloysJournal of Materials Science, 46 (2011): 1628–1634.  SCI 000286632600011 & EI 20113114194749

n         Tie Liu, Qiang Wang, Ao Gao, Hongwei Zhang, Jicheng He: Effects of a high magnetic field on the phase equilibria of Mn-Sb system during solidification process, Journal of Alloys and Compounds, 509 (2011): 5822-5824. SCI 000289369200021 & EI 20111513906942

n         H. Zhang, Ch.-A. Gandin, H. Ben Hamouda, D. Tourret, K. Nakajima, J. HePrediction of solidification paths for Fe-C-Cr alloys by a multiphase segregation model coupled to thermodynamic equilibrium calculationsISIJ International, 50 (2010): 1859-1866. SCI 000285666400019 & EI 20110913712197

n         H. Zhang, K. Nakajima, H. Lei, J. HeRestrictions of physical properties on solidification microstructures of Al-based binary alloys by Cellular AutomatonISIJ International, 50 ( 2010): 1835-1842. SCI 000285666400016 & EI 20110913712194

n         K. Nakajima, H. Zhang, K. Oikawa, M. Ohno and P.G.JonssonMethodological progress for computer simulation of solidification and casting (Review)ISIJ International, 50 (2010): 1724-1734.  SCI 000285666400002 & EI 20110913712180

n         Tie Liu,Qiang Wang,Hong-Wei Zhang,Chang-Sheng Lou,Keiji Nakajima,Ji-Cheng He: Effects of high magnetic fields on solidification microstructure of Al–Si alloys,Journal of Materials Science, 46 (2011): 1628–1634.  SCI 000286632600011 & EI 20113114194749

n         Hongwei Zhang, Keiji Nakajima, Rangqiong Wu, Qiang Wang and Jicheng He:Prediction of solidification microstructure and columnar-to-equiaxed transition of Al-Si alloy by two-dimensional cellular automaton with “decentred square” growth algorithm, ISIJ International, 49 (2009): 1000-1009. SCI 000268361800010 & EI 20094312402709, ISTP 000268361800010

n         Hongwei Zhang, Keiji Nakajima, Wei Xing, Aili Wang and Jicheng He: Influences of flow intensity, cooling rate and nucleation density at ingot surface on deflective growth of dendrites for Al-based alloy, ISIJ International, 49 (2009): 1010-1018. SCI 000268361800011 & EI 20094312402710, ISTP 000268361800010

n         Hong Lei, Hong-Wei Zhang, Ji-Cheng He: Flow, Solidification, and Solute Transport in a Continuous Casting Mold with Electromagnetic Brake, Chemical Engineering & Technology, 32 ( 2009): 991–1002. SCI 000267464600019 & EI 20093712300113

n         Zhang Hong-wei, Wang En-gang, He Ji-cheng, Influence of billet size on flow, solidification and solute transport in continuous casting, Journal of Iron and steel research International,  10(2003): 22-27.  SCI 000186100800005

n         Lin Chuanxing, Hu Mingsheng, Zhang Hongwei. Continuous Determination of Temperature in Graphitizing Resistance Furnaces Using Inverse Heat Conduction. Elektrowarme International, 54(1996): B40-42

   - Invited lectures in international conference

n         H. Zhang, H. Ben Hamouda, D. Tourret, Ch.-A. Gandin, K. Nakajima, J. HePrediction of solidification path for multicomponent alloys by a multiphase segregation modelthe 2nd international symposium on cutting edge of computer simulation of solidification and casting (CSSC2010), February 3-5, Sapporo, Japan, 201047.invited lecture

n         H. Zhang, K. Nakajima, J. HeRestriction of nucleation, flow parameter and physical property on solidification microstructure of Al-based binary alloy by cellular automatonthe 2nd international symposium on cutting edge of computer simulation of solidification and casting (CSSC2010), February 3-5, Sapporo, Japan, 201050-51. invited lecture

   - Publications in international conference with proceedings

n         Hongwei Zhang, Keiji Nakajima, Engang Wang and Jicheng He: Modeling of macrosegregation and solidification microstructure for Al-Si alloy by a coupled cellular automaton – finite volume model, MCWASP XIII 2012, 2012 IOP Conf. Ser.: Mater. Sci. Eng. 33, 012093.  EI 20132116361108

n         Hongwei Zhang, Charles‑André Gandin, Jicheng He and Keiji Nakajima: Prediction of solidification path and carbide precipitation in Fe-C-V-Cr-Mo-W high speed steels, MCWASP XIII 2012, 2012 IOP Conf. Ser.: Mater. Sci. Eng. 33, 012061.  EI 20132116361076

n         Hongwei Zhang, Charles‑André Gandin, Keiji Nakajima and Jicheng He: A multiphase segregation model for multicomponent alloys with a peritectic transformation, MCWASP XIII 2012, 2012 IOP Conference Series: Materials Science Engineering, 33, 012063.  EI 20132116361078

n         ZHANG Hong-wei, JIANG Xing,  HE Ji-chengModeling of orientation and alignment of primary Al3Ni crystal in Al-Ni alloy by imposing a high magnetic fieldJournal of iron and steel research international. 2012, 19 (supplement 1), 1095-1098.

n         Qiang Liu, Hongwei Zhang, Qiang Wang, Xiangkui Zhou, Pär G Jönsson and Keiji Nakajima: Solidification and phase transformations of Ti-added hypereutectic high chromium cast ironsProceedings of 1st International Conference on Ingot Casting, Rolling and Forging, 1-7. Aachen, Germany, June 5, 2012.

n         Zhang Hongwei, Keiji Nakajima, Wang Qiang, Liu Tie, Xing wei, He Jicheng: Cellular Automaton Modeling of Solidification Microstructure of Al-Si Alloy, The 7th Pacific Rim International Conference on Modeling of Casting and Solidification Processes  (Proceedings: Recent development of modeling of casting and Solidification Processes), Aug. 19-22, Dalian, China, 2007: 233-240.

n         Zhang Hongwei, Keiji Nakajima, Wang Qiang, Xing wei, Liu Tie, He Jicheng: Modeling of solidification microstructure for alloys by using cellular automaton, international symposium on liquid metal processing and casting (LMPC), Sept.2-5, Nancy, France, 2007: 201-205.  

n         Liu Tie, Wang Qiang, Wang Ke, Yuan Yi, Zhang Hongwei, Keiji Nakajima and He Jicheng: Control of solidified structures and intergranular precipitations in al-li binary alloys by high magnetic fields, The 7th Pacific Rim International Conference on Modeling of Casting and Solidification Processes, Aug. 19-22, Dalian, China, 2007: 607-612

n         Zhang Hong-wei, Huang Jun-tao, Wang En-gang, He Ji-cheng, Su Xin. Numerical simulation on solidification processes of continuous casting billet with linear electromagnetic stirring, Second international conference on advanced structural steels (ICASS 2004),shanghai2004: 947-950.

n         Zhang Hong-wei, Huang Jun-tao, Wang En-gang, Su Xin, He Ji-cheng. Numerical Simulation for Effects of Electromagnetic Stirring on Solidification Processes of Continuous Casting BilletProceedings: Asia-Euro Workshop on Electromagnetic Processing of MaterialsShenyang2004: 147-154.

n         Zhang hongewei, Wang engang, He Jicheng. Numerical simulation on fluid flow, solidification and solute transport in billet continuous casting process. Workshop on new generation steel (NG STEEL' 2001) ,北京,2001216-221

n         Li Baokuan, Zhang Hongwei, He Jicheng. Motions of Alloying Additions in Gas Stirred Ladles. In: Proceedings of the International Symposium on Metallurgy and Materials of Non-Ferrous Metals and Alloys1996: 311-317

   - Publications in international conference without proceedings

n        Hongwei Zhang, Keiji Nakajima, Hong Lei, Jicheng He: Study of Macrosegregation Formation during Solidification of Alloys, The 4th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2016), Xi’an, China, May 11 - 15, 2016: 153-154 (CSSCR2016 Best Poster Award).

n         Mengmeng Su, Hongwei Zhang, Weixian Wang, Keiji Nakajima, Hong Lei, Jicheng He: Prediction of Influences of Alloy Elements on Precipitation Behavior of Carbides in Solidification of High Speed Steels, The 4th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2016), Xi’an , China, May 11 - 15, 2016: 126-127.

n         Zhongting Yu, Yilun Li, Jianrong Gao, Hongwei Zhang: Liquid-Liquid Phase Separation in Binary Immiscible Alloy by Lattice Boltzmann Method, The 4th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2016), Xi’an , China, May 11 - 15, 2016: 129-130.

n         Hongwei Zhang, Jie Jiang, Keiji Nakajima, Jicheng He: Deflective Dendrite Growth of Fe-C Based Ternary Alloy under Fluid Flow, 3rd International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2013), Aalto univer., Finland & KTHSweden, May 20-23, 201341.

n         Hongwei Zhang, Tie Li, Keiji Nakajima, Engang Wang, Jicheng He: Effects of Thermo-Solutal Buoyancy on Macrosegregation Formation during Solidification of Binary Alloys, 3rd International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2013), Aalto univer., Finland & KTHSweden, May 20-23, 201333.

n         Hongwei Zhang, Keiji Nakajima, Charles‑André Gandin, and Jicheng He: Prediction of Carbide Precipitation Using Partial Equilibrium Approximation in Fe-C-V-W-Cr-Mo High Speed Steels, 3rd International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR2013), Aalto univer., Finland & KTHSweden, May 20-23, 2013118-119.

n         Liu Tie, Wang Qiang, Nakajima Keiji, Zhang Hong-wei, He Ji-cheng: Effect of high magnetic field on microstructures of near eutectic Al-Si alloysA Summer school on Electromagnetic Processing of materialsShenyang, 200633.

校址:辽宁省沈阳市和平区文化路3号巷11号 邮编:110819
Copyright ©Northeastern University | Site Designer: Network Center
Welcome to Northeastern University!