研究论文
 

在《Journal of Computational Physics》, 《International Journal of Heat and Mass Transfer》, 《IEEE Transactions on Magnetics》, 《IEEE Transactions on Dielectrics and Electrical Insulation》, 《Journal of Electrostatics》, 《JOM》, 《ISIJ International》, 《Metallurgical and Materials Transactions》, 《Steel Research International》, 《金属学报》等在内的多种国内外刊物和国内外学术会议上发表了100余篇研究论文,被SCI检索30余篇。

代表性论文

夹杂物
[1] H. Lei,Y. Zhao, D. Q. Geng. Mathematical model for cluster-inclusion's collision-growth in inclusion cloud at continuous casting mold. ISIJ International, 2014, 54(7): 1629-1637
[2] H. Lei, K. Nakajima, J. C. He. Mathematical model for nucleation, Ostwald ripening and growth of inclusion in molten steel. ISIJ International, 2010, 50(12): 1735-1745
[3] H. Lei, L. Z. Wang, Z. N. Wu, J. F. Fan. Collision and coalescence of alumina particles in the vertical bending continuous caster. ISIJ International, 2002, 42(7): 717-725
[4] H. Lei, Y. L. Jin, M. Y. Zhu, J. C. He. Mathematical modelling of particle movement ahead of the solid-liquid interface in continuous casting. Journal of Materials Science & Technology, 2002, 18(5): 403-406
[5] 雷洪, 赫冀成. 连铸结晶器内簇状夹杂物分形生长的Monte Carlo模拟. 金属学报, 2008, 44(6): 698-702
[6] 雷洪,杨柳,赫冀成. 湍流状态下钢液中夹杂物的分形长大过程. 工业加热, 2008, 37(5): 14-16
[7] 雷洪, 赫冀成. 板坯连铸机内钢液流动和夹杂物碰撞长大行为. 金属学报, 2007, 43(11): 1195-1200
[8] 雷洪, 朱苗勇, 赫冀成. 连铸结晶器内非金属夹杂物运动行为模拟. 过程工程学报, 2001, 1(2): 138-141
[9] 耿佃桥, 雷洪, 赫冀成. 不同工艺因素对RH精炼夹杂物去除过程的影响. 钢铁, 2009, 44(10): 26-30

钢的精炼和连铸
[1] H. Lei. New insight into combined model and revised model for RTD curves in a multi-strand tundishes. Metallurgical and Materials Transactions B, 2015, 46B(6): 2408-2413
[2] H. Lei. Similarity of mold metallurgy. JOM, 2012, 64(9): 1075-1079
[3]. D. Q. Geng, H. Lei, J. C. He. Simulation on flow field and mixing phenomenon in RH degasser with ladle bottom blowing. Ironmaking and Steelmaking  2012, 39(6): 431-438
[4] D. Q. Geng, H. Lei, J. C. He. Numerical simulation of the multiphase flow in the Rheinsahl-Heraeus(RH) system. Metallurgical and Materials Transactions B, 2010, 41(1):234-247
[5] H. Lei, M. Y. Zhu, J. C. He. Mathematical and Physical Modeling of Interfacial Phenomena in Continuous Casting Mould with Argon Injection through Submerged Entry Nozzle. Acta Metallurgica Sinica, 2000, 13(5): 1079-1086
[6] 雷洪,赵岩, 鲍家琳, 刘承军, 陈海耿, 赫冀成. 多流连铸中间包停留时间分布曲线总体分析方法. 金属学报, 2010, 46(9): 1109-1114
[7] 耿佃桥, 雷洪, 赫冀成. 侧底复吹RH真空精炼脱碳过程研究. 东北大学学报, 2012, 33(6): 836-839
[8] 赵岩, 雷洪, 周骏, 陈海耿, 孙中强, 邢国成. 侧孔长水口两流非对称中间包流场优化. 钢铁, 2012, 47(4): 28-31
[9] 耿佃桥, 雷洪, 赫冀成, 黄健, 李秉强. 不同底吹位置对VD精炼脱碳过程的影响, 钢铁, 2010, 45(1): 29-33.
[10] 雷洪, 朱苗勇, 赫冀成. 连铸结晶器漩涡现象的物理模拟. 过程工程学报, 2001, 1(1): 36-39
[11] 雷洪, 朱苗勇, 赫冀成. 连铸结晶器内卷渣过程的数学模型. 金属学报, 2000, 36(10):1113-1117
[12] 雷洪, 许海虹, 朱苗勇, 干勇, 刘新, 倪满森, 刘家奇. 高速连铸结晶器内卷渣机理及其控制研究. 钢铁, 1999, 34(8): 20-23

电磁流体力学
[1] D. Q. Geng, H. Lei, J. C. He. Effect of traveling magnetic field on flow, mixing, decarburization and inclusion removal during RH refining process. ISIJ International, 2012, 52(6): 1036-1044
[2] D. Q. Geng, H. Lei, J. C. He. Effect of electromagnetic swirling flow in slide-gate SEN on flow field in square billet continuous casting mold. ACTA Metallurgica Sinica, 2012, 25(5): 347-356
[3] H. Lei, H. W. Zhang, J. C. He. Flow, solidification, and solute transport in a continuous casting mold with electromagnetic brake. Chemical Engineering & Technology, 2009, 32(6): 991-1002
[4] H. Lei, L. Z. Wang, Z. N. Wu: EHD turbulent flow and Monte-Carlo simulation for particle charging and tracing in a wire-plate electrostatic precipitator.Journal of Electrostatics, 2008, 66(3-4): 130-141
[5] H. Lei, G. J. Xu, J. C. He, Magnetic field, flow field and inclusion collision growth in a continuous caster with EMBR. Chemical Engineering & Technology, 2007, 30(12): 1650-1658
[6] H. Lei, Charge-current-conservation model for calculating electrical conditions in a wire-plate electrostatic precipitator. IEEE Transactions on Dielectrics and Electrical Insulation, 2006, 13(4): 795-802
[7] H. Lei, L. Z. Wang, Z. N. Wu. Applications of upwind and downwind schemes for calculating electrical conditions in a wire-plate electrostatic precipitator. Journal of Computational Physics, 2004, 193(2): 697-707
[8] H. Lei, M. Y. Zhu, J. C. He. Optimum position of electromagnetic brake on slab caster. Journal of Iron and Steel Research International, 2003, 10(2):21-26
[9] H. Lei, L. Z. Wang, Z. N. Wu. Integral analysis of a magnetic field for an arbitrary geometry coil with rectangular cross section. IEEE Transactions on Magnetics, 2002, 38(6): 3589-3593
[10] 耿佃桥, 雷洪, 苏志坚, 赫冀成, 孙琮琮. 连铸电磁旋流水口流体流动和夹杂物行为. 北京科技大学学报(自然科学版), 2012, 34(5): 519-524
[11] 雷洪; 赫冀成. 稳态不可压流计算方法在稳恒电磁场中的应用. 东北大学学报, 2008, 29(4): 545-548
[12] 雷洪, 朱苗勇, 王文忠. 板坯结晶器内电磁制动过程流场的数值模拟. 化工冶金, 1999, 20(4): 193-198

声学
[1] H. Lei, D. Henry, H. BenHadid. Acoustic force model for the fluid flow under standing waves. Applied Acoustics. 2011, 72(10): 754-759
[2] H. Lei, D. Henry, H. BenHadid. Numerical study of the influence of a longitudinal sound field on natural convection in a cavity. International Journal of Heat and Mass Transfer, 2006, 49(19-20): 3601-3616

其它
[1] 雷洪; 乔娜; 耿佃桥; 张红伟. 疏水冷面霜晶生长的有限扩散凝聚模型. 东北大学学报, 2012, 33(11): 1591-1594
[2] 雷洪, 赫冀成. 基于OpenMP的湍流场中颗粒碰撞聚合数值模拟并行计算. 东北大学学报, 2009, 30(11): 1602-1605
[3] H. Lei, M. Y. Zhu, J. C. He, Dynamic behaviour of bubbles ahead of advancing solid/liquid interface in continuous casting machine. International Journal of Cast Metals Research, 2007, 20(2): 98-102

 

校址:辽宁省沈阳市和平区文化路3号巷11号 邮编:110819
Copyright ©Northeastern University | Site Designer: Network Center
Welcome to Northeastern University!