|
- Shijie Jiang*, Pifeng Chen, Yang Zhan and Chunyu Zhao. Theoretical and computational analysis on the melt flow behavior of polylactic acid in material extrusion additive manufacturing under vibration field [J]. Applied Sciences, 2020, 10(11): 3801, https://doi.org/10.3390/ app10113801. 【SCI Q2】.
- Shijie Jiang*, Yinfang Shi, Yannick Siyajeu, Ming Zhan, Chunyu Zhao and Changyou Li. Effect of processing parameters on the dynamic characteristic of material extrusion additive manufacturing plates [J]. Applied Sciences, 2019, 9(24): 5345, DOI:10.3390/app9245345. 【SCI Q2】.
- Shijie Jiang*, Ming Zhan, Mingyu Sun, Weibing Dai and Chunyu Zhao. Experimental and theoretical analysis on the dynamic characteristics of fused filament fabrication plates [J], Shock and Vibration, 2019, 1219435, DOI:10.1155/2019/1219435. 【SCI Q3】.
- S. Jiang*, P.A. Meehan, P.A. Bellette, D.J. Thompson and C.J.C. Jones. Validation of a prediction model for tangent rail roughness and noise growth [J], Wear, 2014, 314(1–2): 261-272. 【SCI Q1】.
- Chaofeng Li, Shihua Zhou, Shijie Jiang*, Hexing Yu, Bangchun Wen. Investigation on the stability of periodic motions of a flexible rotor-bearing system with two unbalanced disks [J], Journal of Mechanical Science and Technology, 2014, 28(7): 2561-79. 【SCI Q3】.
- 姜世杰*, 胡科, 陈丕峰, 战明. 熔丝成型制品三维表面粗糙度的理论与试验研究 [J]. 东北大学学报（自然科学版）, 2022, 43(9): 1290-1297. 【EI】.
- 姜世杰*, 孙明宇, 战阳, 李常有. 利用不同振动加工对FFF薄板动力学特性的影响 [J]. 振动与冲击, 2022, 41(24): 287-292. 【EI】.
- 姜世杰*, 陈丕峰, 胡科, 战阳, 李常有. 打印层厚度及路径宽度对熔丝成型结合颈的影响规律研究 [J]. 机械工程学报, 2022, 58(9): 291-297. 【EI】.
- 姜世杰*, 王子恒, 于长帅, 任旭辉, 王欣彤, 王相平, 韩清凯, 李晖. 带有微孔粘弹性芯层的纤维金属混杂层合板振动分析模型 [J]. 振动与冲击, 2022, 41(9): 8-15. 【EI】.
- 姜世杰*, 董天阔, 戴卫兵, 战明. 熔丝成型薄板拉伸性能的理论与实验研究 [J]. 东北大学学报（自然科学版）, 2022, 43(1): 65-70. 【EI】.