论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Smelting high purity 55SiCr automobile suspension spring steel with different refractories

发布时间:2024-12-07 点击次数:

第一作者:李阳
通讯作者:陈常勇
合写作者:秦国清
发表刊物:High Temperature Materials and Processes
期号:1
卷号:41
影响因子:1.6
DOI码:10.1515/htmp-2022-0029
所属单位:东北大学冶金学院
教研室:绿色智能特殊钢冶金研究中心
摘要:We performed a laboratory investigation at 1,873 K using a MoSi2 furnace to study the effect of refractories on inclusions in 55SiCr suspension spring steel. Three types of crucible materials (Al2O3, MgO center dot Al2O3, and MgO-CaO) were investigated. The results of this study indicated that SiO2, Al2O3, and MgO center dot Al2O3 were not suitable for making 55SiCr suspension spring steel. By contrast, MgO-CaO was a perfect choice for producing 55SiCr suspension spring steel. The advantages of using MgO-CaO crucibles to smelt 55SiCr spring steel were summarized in three aspects as follows: (i) the stability of MgO-CaO was quite good; (ii) a MgO-CaO crucible could act as a desulfurizer and dephosphorizer; (iii) finally, a MgO-CaO crucible could simultaneously remove Al2O3 inclusions.
关键字:non-metallic inclusions; 55SiCr spring steel; refractory; MgO–CaO refractory
论文类型:SCI
备注:
学科门类:工学
一级学科:冶金工程
页面范围:315-327
ISSN号:0334-6455
是否译文: