第一作者：李阳
通讯作者：陈常勇,姜周华
合写作者：秦国清,孙萌,陈奎
发表刊物：International Journal of Minerals, Metallurgy and Materials
期号：8
卷号：27
影响因子：5.6
DOI码：10.1007/s12613-019-1957-8
所属单位：东北大学冶金学院
教研室：绿色智能特殊钢冶金研究中心
摘要：To investigate the interaction mechanism between 95Cr saw-wire steel and different refractories, we conducted laboratory experiments at 1873 K. Five crucible materials (SiO2, Al2O3, MgO center dot Al2O3, MgO, and MgO-CaO) were used. The results indicate that SiO2, Al2O3, and MgO center dot Al(2)O(3)are not suitable for smelting low-oxygen, low-[Al](s)95Cr saw-wire steel, mainly because they react with the elements in the molten steel and pollute the steel samples. By contrast, MgO-CaO is an ideal choice to produce 95Cr saw-wire steel. It offers three advantages: (i) It does not decompose by itself at the steelmaking temperature of 1873 K because it exhibits good thermal stability; (ii) [C], [Si], and [Mn] in molten steel cannot react with it to increase the [O] content; and (iii) it not only desulfurizes and dephosphorizes but also removes Al(2)O(3)inclusions from the steel simultaneously. As a result, the contents of the main elements ([C], [Si], [Mn], [Cr], N, T.O (total oxygen)) in the steel are not affected and the content of impurity elements ([Al](s), P, and S) can be perfectly controlled within the target range. Furthermore, the number and size of inclusions in the steel samples decrease sharply when the MgO-CaO crucible is used.
关键字：nonmetallic inclusions95Cr saw-wire steelcrucible materialMgO-CaO refractory
论文类型：SCI
备注：无
学科门类：工学
一级学科：冶金工程
页面范围：1083-1099
ISSN号：1674-4799
是否译文：否