论文成果

Influence of Heat Treatment on Hydroformability of TRIP Seamless Steel Tube

发布时间:2023-10-07  点击次数:

第一作者:Zicheng Zhang

发表刊物:Journal of Iron and Steel Research

期号:7

卷号:21 (2014)

影响因子:2.5

DOI码:10.1016/S1006-706X(14)60108-4

摘要:A low-carbon TRIP seamless steel tube, which is expected to be used in the hydroforming process, was successfully fabricated using piercing, cold-drawing and two-stage heat treatment process. The two-stage heat treatment is one crucial step because it significantly affects the microstructure and mechanical properties of TRIP seamless steel tube. In order to obtain the TRIP seamless steel tube with high hydroformability, several different heat treatment processes were conducted. The effects of heat treatment conditions (intercritical annealing (IA) and isothermal bainite treatment (IBT)) on the TRIP seamless steel tube hydroformability which was determined by free hydraulic bulge test were analyzed. Two different internal pressure boosting velocities of 0.2 and 0.5 MPa/s of free hydraulic bulge tests were adopted to determine the effective stress vs. effective strain curve of TRIP seamless steel tube. The results showed that for the predetermined IA condition, the maximum bulge height increased, but the maximum burst internal pressure decreased, with the increase of IBT holding time from 4 to 6 min. For the predetermined IBT condition, the maximum bulge height decreased, but the maximum burst internal pressure increased, with the increase of IA holding time from 5 to 10 min. By analyzing the free hydraulic bulge test results, it was found that the maximum bulge heights of TRIP seamless steel tubes with the internal pressure boosting velocity of 0.5 MPa/s were higher than those when the internal pressure boosting velocity was 0.2 MPa/s. This means that an appropriate deformation rate should be chosen to obtain the optimal hydroformability of TRIP seamless steel tube. In addition, the effective stress vs. effective strain curves of TRIP seamless steel tubes were obtained with free hydraulic bulge test.

关键字:TRIP steel;heat treatment;hydroformability;seamless tube;hydraulic bulge test

页面范围:695-701

是否译文:

校址:辽宁省沈阳市和平区文化路三巷11号 | 邮编:110819

访问量:| 最后更新时间:--| 开通时间:-- |手机版

扫描查看移动版