|
- [1] Zhu L*, Ren T, Xu P. Reforms and applications of online practice teaching in the field of new engineering[J]. International Journal of Technology Enhanced Learning, 2023, 15(1): 14-25..
- [2] Yang Z1, Zhu L1,*, Ning J, et al. Revealing the influence of ultrasound/heat treatment on microstructure evolution and tensile failure behavior in 3D-printing of Inconel 718[J]. Journal of Materials Processing Technology, 2022, 305: 117574. (SCI JCR Q1) IF=6.197.
- [3] Hao Y1, Zhu L1,*, Yan B, et al. Stiffness design and multi-objective optimization of machine tool structure based on biological inspiration[J]. Journal of Vibration and Control, 2022: 10775463221085858. (SCI JCR Q1) IF=2.656.
- [4] Hao Y1, Zhu L1,*, Yan B, et al. Milling chatter detection with WPD and power entropy for Ti-6Al-4V thin-walled parts based on multi-source signals fusion[J]. Mechanical Systems and Signal Processing, 2022, 177: 109225. (SCI JCR Q1) IF=8.934.
- [5] Xu P1, Zhu L1,*, Xue P, et al. Microstructure and properties of IN718/WC-12Co composite coating by laser cladding[J]. Ceramics International, 2022, 48(7): 9218-9228. (SCI JCR Q1) IF=5.532.
- [6] Yan B1, Hao Y1, Zhu L*, et al. Towards high milling accuracy of turbine blades: A review[J]. Mechanical Systems and Signal Processing, 2022, 170: 108727. (SCI JCR Q1) IF=8.934.
- [7] Zhu L1,*, Wang S1, Lu H, et al. Investigation on synergism between additive and subtractive manufacturing for curved thin-walled structure[J]. Virtual and Physical Prototyping, 2022, 17(2): 220-238. (SCI JCR Q1) IF=10.962.
- [8] Ning J1, Yan Z1, Zhu L*, et al. Process-induced mechanical property heterogeneity along the building direction of directed energy deposited IN718 thin-walled parts[J]. International Journal of Mechanical Sciences, 2022, 218: 107075.(SCI JCR Q1) IF=6.7.
- [9] Zhang J1, Meng G1, Zhu L*, et al. Formation mechanism and mechanical properties of TiC reinforced Inconel 718 composite coatings by laser cladding on H13 steel[J]. The International Journal of Advanced Manufacturing Technology, 2022, 121(5-6): 3597-3611. ( SCI JCR Q2) IF=3.59.
- [10] Qin S1, Zhu L1,*, Wiercigroch M, et al. Material removal and surface generation in longitudinal-torsional ultrasonic assisted milling[J]. International Journal of Mechanical Sciences, 2022, 227: 107375. (SCI JCR Q1) IF=6.772.