|
- [2] Lida Zhu*, Baoguang Liu and Hongyu Chen.Research on chatter stability in milling and parameter optimization based on process damping[J], Journal of Vibration and Control,2018. 24(12):2642–2655. (SCI JCR Q1) IF=2.169.
- [3] Chenbing Ni, Lida Zhu*, Changfu Liu, Zhichao Yang. Analytical modeling of tool-workpiece contact rate and experimental study in ultrasonic vibration-assisted milling of Ti–6Al–4V[J], International Journal of Mechanical Sciences,2018. 142:97–111. (SCI JCR Q1) IF=4.631.
- [4] Changfu Liu, Lida Zhu*, Chenbing Ni.Chatter detection in milling process based on VMD and energy entropy[J]. Mechanical Systems and Signal Processing, 2018. 105:169-182. (SCI JCR Q1) IF=6.417.
- [5] 王润琼，朱立达*，朱春霞*. 基于域扩展因子和微凸体相互作用的结合面接触刚度模型研究* [J], 机械工程学报, 2018, 54(9)：88-95. (EI).
- [6] 刘长福，朱立达*，仇健等. 基于VMD和FFT的变切深侧铣颤振特征提取方法[J]，东北大学学报，2018. 39(8):1153-1157 (EI).
- 2017年.
- [1] Changfu Liu, Lida Zhu*, Chenbing Ni. The chatter identification in end milling based on combining EMD and WPD[J],International Journal of Advanced Manufacturing Technology,2017. 91(9-12):3339–3348(SCI JCR Q2) IF=2.633.
- [2] Runqiong Wang, Lida Zhu*, Chunxia Zhu. Research on fractal model of normal contact stiffness for mechanical joint considering asperity interaction [J]. International Journal of Mechanical Sciences, 2017. 134: 357-369(SCI JCR Q1) IF=4.631.
- [3] Baoguang Liu, Lida Zhu*, Yichao Dun, Changfu Liu.Investigation on chatter stability of thin-walled parts in milling based on process damping with relative transfer functions[J], International Journal of Advanced Manufacturing Technology, 2017. 89(9-12):2701-2711(SCI JCR Q2) IF=2.633.
- 2016年.